Fix: Blank screen when using Windows XP telnet client


Today when I established a telnet session to a host on port 80 from my Windows XP machine, I was unable to see any commands I typed echoed on the screen.  I knew I had to enable local echo, but always seem to forget how to do it.

KB196748 describes how to enable local echo so you can see the commands you type.  To enable local echo:

1.  Telnet to the host, ie

 telnet host 80
 
Where host is the name of the host you are connecting to, and 80 is the port number you wish to connect to.
 
2.  Type
 
CTRL+]
 
(That means, with the CTRL key depressed, hit the plus key then the closed bracket key)
 
3.  Type
 
set localecho
 
Note:  If using Windows 2000, replace set localecho with set local_echo
 
4.  Press Enter on a blank line
 
If each letter you type appears twice, use the same process to deactivate local echo.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: